Blar i Master's theses in Civil and Structural Engineering på tittel
Viser treff 111-130 av 130
-
Standardisering av brokonstruksjoner for nasjonale hovedveier
(Master thesis, 2017)Standardization is currently not being utilized much in the Norwegian road building industry compared to the rest of the construction industry and road construction abroad. To harvest the potential benefits, it is interesting ... -
Standardiserte konstruksjonselementer av fiberarmert polymer for vegbru : Design og dimensjonering av elementer for standardisering og bruk i vegbruer
(Master thesis, 2017)This thesis is addressing the possibility for use of fiber reinforced polymers (FRP) in bridge constructions in Norway. The aim is to design an FRP section that can perform as both structural support and decking on the ... -
"Start with the end in mind" En gjennomgang av potensialet i grensesnittet mellom VDC i prosjektering og LPS i produksjon.
(Master thesis, 2022)Since the emergence of Lean and later Lean Construction, several new tools and methodologies have been introduced to operationalize mindsets and adapt it to project-based production. Despite a desire to increase project-based ... -
"Start with the end in mind" En gjennomgang av potensialet i grensesnittet mellom VDC i prosjektering og LPS i produksjon.
(Master thesis, 2022)Since the emergence of Lean and later Lean Construction, several new tools and methodologies have been introduced to operationalize mindsets and adapt it to project-based production. Despite a desire to increase project-based ... -
Stålbjelke og hulldekkeelementer i samvirkekonstruksjon
(Master thesis, 2023)The work with this project is the result of the Master’s Thesis at University of Agder, and mark the final subject for obtaining the degree Master of Science in the field of Civil and Structural Engineering. The report ... -
Stålbjelke og hulldekkeelementer i samvirkekonstruksjon
(Master thesis, 2023)This report is the result of Master’s Thesis at University of Agder, and mark the final subject for obtaining the degree Master of Science in the field of Civil and Structural Engineering. The report takes a close look ... -
Stålfiber betong konsistens og mekaniske egenskaper
(Master thesis, 2022)In this era of rapid urban, the demand of concrete has also increased. This has given rise to more research on concrete performance and approach towards changes in concrete composition to fight global warming challenges. ... -
Sustainability assessment of an apartment building containing reinforced concrete or cross-laminated timber (CLT)
(Master thesis, 2019)Today, the construction industry contributes to40% of the world’s energy consumption and greenhouse gasemissions(GHGs). According to theIntergovernmental Panel on Climate Change’s(IPCC)report, the greenhouse gas emissions ... -
UHPC i norsk brobygging
(Master thesis, 2020) -
Use of BIM Technology and 3D-Modeling to Automate the Paperless Reinforcement Production
(Master thesis, 2018)Although, Building Information Modeling has flourishing development for reinforced concrete, still there is a long way to achieve efficient performance throughout reinforcement supply chain. Statsbygg through the use of ... -
Utfordringer i fuktprosjektering
(Master thesis, 2024)This master's thesis was mainly carried out as a qualitative study. The assignment is based on semi-structured interviews based on ten informants who have different backgrounds and experience from the industry. The task ... -
Utmatting som følge av OPB i fortøyningsliner av kjetting : FEM analyse av topp-kjedet utsatt for OPB i henhold til retningslinjer av Bureau Veritas : Beregning og evaluering av utmattingslevetid for kjettingen, der effekten av en innfestningsarm med et lavfriksjonslager i enden mot den flytende konstruksjonen undersøkes
(Master thesis, 2019)Offshore structures are exposed to harshenvironments where there are many kinds of loads acting on the structure. These loads lead to complicated conditions with many possible load combinations. In addition, they are ... -
Verifisering av jordskjelvkapasitet av eksisterende bygg i henhold til Eurokode 8 : En studie om jordskjelvanalyse av eksisterende murbygg
(Master thesis, 2019)This master thesis is written in collaboration with Multiconsult and University of Agder. Earthquake design is a new field of study in Norway, and over the past decade it has become a part of rule and regulations ... -
Vibration-based structural health monitoring of a model truss bridge
(Master thesis, 2022)Vibration-based methods with accerleration sensors are playing an increasingly important role in structuctural health monitoring of modern bridges. This master thesis investigates how the change in the truss bridge’s dynamic ... -
Vibration-based structural health monitoring of a model truss bridge
(Master thesis, 2022)Vibration-based methods with accerleration sensors are playing an increasingly important role in structuctural health monitoring of modern bridges. This master thesis investigates how the change in the truss bridge’s dynamic ... -
Vindkraft ved E18
(Master thesis, 2023)Wind turbine technology is a field that has experienced significant innovation and technical progress over the last decades. Because of this, such projects are more feasible now than ever, particularly from a technical ... -
Vindkraft ved E18
(Master thesis, 2023)Wind turbine technology is a field that has experienced significant innovation and technical progress over the last decades. Because of this, such projects are more feasible now than ever, particularly from a technical ... -
Vindkraft ved E18
(Master thesis, 2023)Wind turbine technology is a field that has experienced significant innovation and technical progress over the last decades. Because of this, such projects are more feasible now than ever, particularly from a technical ... -
Visuell programmering ved design av fagverk i tre
(Master thesis, 2023)This master thesis deals with the use of visual programming and parametric design. The aim is to determine whether this can make the traditional process for structural design more efficient (for wooden structures). The ... -
Visuell programmering ved design av fagverk i tre
(Master thesis, 2023)This master thesis deals with the use of visual programming and parametric design. The aim is to determine whether this can make the traditional process for structural design more efficient (for wooden structures). The ...