Browsing Master's theses in Civil and Structural Engineering by Issue Date
Now showing items 81-100 of 130
-
Effekten av fotoreaktivering og partikkelinnhold ved UV-desinfeksjon av renset avløpsvann
(Master thesis, 2022)UV-disinfection as a treatment method is well suited for wastewater treatment plants of medium size or smaller and is an effective way to inactivate microorganisms. However, the treatment method is dependent on factors ... -
Vibration-based structural health monitoring of a model truss bridge
(Master thesis, 2022)Vibration-based methods with accerleration sensors are playing an increasingly important role in structuctural health monitoring of modern bridges. This master thesis investigates how the change in the truss bridge’s dynamic ... -
Optimalisering av driften ved Saulekilen Renseanlegg i Arendal kommune med hensyn på kjemisk felling og slamavvanning
(Master thesis, 2022)The wastewater contains a lot of nutrients that can be harmful to nature, such as phosphorus. Therefore, to avoid negative consequences caused by these nutrients, it is desirable to minimize them before discharge. The ... -
"Start with the end in mind" En gjennomgang av potensialet i grensesnittet mellom VDC i prosjektering og LPS i produksjon.
(Master thesis, 2022)Since the emergence of Lean and later Lean Construction, several new tools and methodologies have been introduced to operationalize mindsets and adapt it to project-based production. Despite a desire to increase project-based ... -
Anvendelsesområder for 3D-printing av betongkonstruksjoner
(Master thesis, 2022)The intention of this master thesis is to investigate the application area for 3D printing of concrete in the construction industry and was written during the spring of 2022 at the University of Agder. 3D printing or ... -
Analyse av arealutnyttelse, vibrasjoner og knutepunkter i moderne trekonstruksjoner
(Master thesis, 2022)Cross-laminated timber (CLT) is a popular construction material combining good structural properties and environmental advantages. In the last decade, CLT has been playing a key role in increasing the use of timber ... -
Hva kjennetegner et risikofylt byggeprosjekt?
(Master thesis, 2022)Risk management has been a severe tool in the construction industry for several decades. Not only in terms of health, environment and security, but profitability and viability as well. The industry is exposed for an ... -
Dimensjonering og analyse av fiberarmert polymer som armeringsstenger i plattendekke
(Master thesis, 2022)Fiber reinforced polymer (FRP) is an advanced composite which offers high capacity in tensile strength, low weight and excellent corrosion resistance. Rebars made from basalt-, glass- and carbon fibers are readily available ... -
Vibration-based structural health monitoring of a model truss bridge
(Master thesis, 2022)Vibration-based methods with accerleration sensors are playing an increasingly important role in structuctural health monitoring of modern bridges. This master thesis investigates how the change in the truss bridge’s dynamic ... -
Effekten av fotoreaktivering og partikkelinnhold ved UV-desinfeksjon av renset avløpsvann
(Master thesis, 2022)UV-disinfection as a treatment method is well suited for wastewater treatment plants of medium size or smaller and is an effective way to inactivate microorganisms. However, the treatment method is dependent on factors ... -
LCA-analyse av en ny, glassbasert vann- og frostsikringsløsning i tunnel
(Master thesis, 2023)This master thesis addresses some opportunities of reducing the environmental impacts when planning and construction of a road tunnel. It includes a LCA for two different approaches of tunnel lining; a new solution of ... -
Pyrolyse i avløpshåndtering og utvinning av biokull
(Master thesis, 2023)This thesis has investigated if pyrolysis is a sustainable solution for the treatment of sewage sludge for Horten Municipality. Separate laboratory experiments and literature research was executed to answer the research ... -
Effect of different silica fume on concrete properties: Comparative testing and analysis
(Master thesis, 2023)Concrete, as the world’s most widely used construction material, contributes significantly to climate change due to emissions generated during cement production. The industry has set ambitious goals to achieve carbon-neutral ... -
Bruken av 3D-laserskanning i produksjonen av bygg
(Master thesis, 2023)The construction industry has vast potential for improving productivity and efficiency, and in the era of Construction 4.0 the spotlight has been put on the integration of state-of-the-art digital technologies and automation ... -
Bruken av 3D-laserskanning i produksjon av bygg
(Master thesis, 2023)The construction industry has vast potential for improving productivity and efficiency, and in the era of Construction 4.0 the spotlight has been put on the integration of state-of-the-art digital technologies and automation ... -
Herdeteknologi – modellering av betongens temperatur- og fasthetsutvikling
(Master thesis, 2023)For many years, Heidelberg Materials Cement Norway has offered the Norwegian concrete market the curing technology software HETT97. This software is a planning tool for simulating temperature and strength development in ... -
Sirkulærøkonomi i norsk veiinfrastruktur: Veien videre
(Master thesis, 2023)Denne masteroppgaven undersøker bruken av sirkulær økonomi (SØ) i veiinfrastruktur, og utforsker barrierer og drivere som påvirker implementeringen. Studien tar sikte på å identifisere hvordan norsk veiinfrastruktur kan ... -
Herdeteknologi – modellering av betongens temperatur- og fasthetsutvikling
(Master thesis, 2023)For many years, Heidelberg Materials Cement Norway has offered the Norwegian concrete market the curing technology software HETT97. This software is a planning tool for simulating temperature and strength development in ... -
Life Cycle Assessment of road construction: A case study of the E39 Betna-Hestnes road project in Norway
(Master thesis, 2023)This master thesis assesses the environmental impacts caused by constructing E39 Betna-Hestnes Road Project in Trøndelag County, Norway, by using LCA methodology. additionally, this thesis seeks to identify potential ... -
Ombruk av hulldekker fra eksisterende bygg
(Master thesis, 2023)For a long time, the construction industry has been dominated by a linear mindset in building projects. The contemporary focus on our earth’s climate, has put pressure on the industry in regard to its relation for circular ...