Blar i Master's theses in Civil and Structural Engineering på utgivelsesdato
Viser treff 61-80 av 130
-
Avstivningsevnen til sammensatte veggelementer av limtre
(Master thesis, 2022)In recent years, the use of timber in large structures has increased, partly because of its good environmental properties. One wood-based product that has emerged is the HBE-element, which practically is a 580mm high glulam ... -
Livsløpsvurdering av geopolymerbetong lagd med avgangsmasser fra ilmenittgruvedrift
(Master thesis, 2022)Global CO2 emissions from cement production represent a major challenge on the path towards a future of net zero emissions. Alternative concrete binders are therefore being developed, and one such binder is called geopolymer ... -
Effekten av fotoreaktivering og partikkelinnhold ved UV-desinfeksjon av renset avløpsvann
(Master thesis, 2022)UV-disinfection as a treatment method is well suited for wastewater treatment plants of medium size or smaller and is an effective way to inactivate microorganisms. However, the treatment method is dependent on factors ... -
Dispensasjon i strandsonen En analyse av dispensasjonsvedtak til Plan- og bygningslovens §1-8. i Lillesand kommune.
(Master thesis, 2022)There is an increase in the influence of privatized coastal zone, whereas Lillesand municipality only has 50,5% available to the general public. In this master thesis, the topic “privatization of the coastal zone” is ... -
Analyse av arealutnyttelse, vibrasjoner og knutepunkter i moderne trekonstruksjoner
(Master thesis, 2022)Cross-laminated timber (CLT) is a popular construction material combining good structural properties and environmental advantages. In the last decade, CLT has been playing a key role in increasing the use of timber ... -
Stålfiber betong konsistens og mekaniske egenskaper
(Master thesis, 2022)In this era of rapid urban, the demand of concrete has also increased. This has given rise to more research on concrete performance and approach towards changes in concrete composition to fight global warming challenges. ... -
Dimensjonering av vegoverbygninger: Sammenligning mellom den empiriske og mekanistiskempiriske dimensjoneringsmetoden
(Master thesis, 2022)This master’s thesis focuses on different methods for designing pavement structures, mainly the empirical and the mechanistic-empirical methods. The first one is used in Norway, and the design is done by following a handbook ... -
Concrete Waste Recovery and Emissions Reductions in the Norwegian Concrete Industry
(Master thesis, 2022)Concrete is recognised as one of the most available and durable building materials. As a result, it is widely used and in large quantities. This is in its significant contribution to our greenhouse gas emissions and depletion ... -
Fiberarmert betong i vegg- og bjelkeelementer: Prøving og sammenligning av fullskala vegg og praktiske laboratorieresultater
(Master thesis, 2022)This report is written as a final thesis for a master's degree in civil engineering at the University of Agder. The scope of this report is fiber-reinforced concrete in walls and especially fiber-reinforced concrete in a ... -
Digitalisering av eksisterende bygg
(Master thesis, 2022)The use of Building Information Modelling (BIM) is well adapted in the Architectural Engineering and Construction (AEC) Industry and has already made a great impact in the industry. However, the adoption of BIM in existing ... -
Fiberensegenskaper i brudd- og bruksgrensetilstand
(Master thesis, 2022)The master's thesis is written in collaboration with the project FiberCon. The purpose of the project is to develop solution methods that are sustainable and economical for concrete structures. The master's thesis is about ... -
Rensing av tunnelvaskevann med kjemisk felling og filtrering - En studie av renseeffekten på tunnelvaskevann med kjemisk felling med kitosan, PAX og filtrering som metode
(Master thesis, 2022)Tunnel wash water (TWW) is highly contaminated with a range of different pollutants, including heavy metals in both solid and dissolved state. Untreated TWW released directly to recipients might cause harm to aquatic ... -
Digitalisering av eksisterende bygg
(Master thesis, 2022)The use of Building Information Modelling (BIM) is well adapted in the Architectural Engineering and Construction (AEC) Industry and has already made a great impact in the industry. However, the adoption of BIM in existing ... -
Sammenhengen mellom boligtetthet og nærhet til hverdagsfunksjoner og infrastruktur
(Master thesis, 2022)Due to increase in population, urbanization increased with the development of new residential areas.To compensate for the overpopulation, scattered residential building development was often used; however, housing density ... -
Gjenåpning av lukket bekk
(Master thesis, 2022)Climate change has led to more frequent and faster precipitation events, which create major challenges in stormwater. the wiring is outdated and undersized and the urbanized area consists mainly of dense surfaces, which ... -
"Start with the end in mind" En gjennomgang av potensialet i grensesnittet mellom VDC i prosjektering og LPS i produksjon.
(Master thesis, 2022)Since the emergence of Lean and later Lean Construction, several new tools and methodologies have been introduced to operationalize mindsets and adapt it to project-based production. Despite a desire to increase project-based ... -
Risikostyring i prosjektgjennomføring: En casestudie av risikostyring i prosjektgjennomføring hos Kruse Smith
(Master thesis, 2022)This master’s thesis is conducted at the University of Agder in cooperation with Kruse Smith Entreprenør. The thesis is a case study on risk management in Kruse Smith. In 2018, Kruse Smith implemented a new method for risk ... -
DIC and Cohesive FE-analysis of glulam beams with two large, circular holes
(Master thesis, 2022)Introducing a large hole into a load-bearing timber beam causes stress concentrations in the hole vicinity. Tensile stress perpendicular to the grain presents a particular crack initiation and propagation risk. Unfortunately, ... -
Anvendelsesområder for 3D-printing av betongkonstruksjoner
(Master thesis, 2022)The intention of this master thesis is to investigate the application area for 3D printing of concrete in the construction industry and was written during the spring of 2022 at the University of Agder. 3D printing or ... -
Enhancing Material Reduction in the Construction Industry Through Modern Technologies
(Master thesis, 2022)The problem area of this master thesis is how can modern technologies be utilized in bespoke concrete construction to reduce material mass and incorporate traditional architectural features into today's construction industry ...