Vis enkel innførsel

dc.contributor.authorRøksland, Anniken Ophaug
dc.date.accessioned2018-09-17T10:05:50Z
dc.date.available2018-09-17T10:05:50Z
dc.date.issued2018
dc.identifier.urihttp://hdl.handle.net/11250/2562910
dc.descriptionMasteroppgave bygg BYG508 - Universitetet i Agder 2018nb_NO
dc.description.abstractTechnology evolves exponentially, and technological aids follow the same course. Manufacturing methods in the construction industry are also constantly evolving, and a company that wishes to follow this development is Contiga. Contiga is the leading supplier of prefabricated concrete elements in Norway. For several years they have used the Lean methodology, and with this methodology mapped where in the manufacturing process there is room for improvement. Prefabrication has become more and more common in recent years, and innovative solutions and methods have also come. In the process of manufacturing the concrete elements, models are constructed of the elements. The models prepared have very high accuracy, and a lot of information. This information provides the basis for increased use of BIM and the tools associated with this. Prior to this task, a preliminary project was made where information gathered about what BIM in production could contribute. Contiga is the leading supplier of concrete elements in Norway, and they wanted to test some of the findings. Together with COWI, EDR, Kamstål AS and PERI, the possibility of prefabrication of reinforcement and formwork was investigated using CNC machines. The CNC machines get the required information directly from the model. Models developed by Contiga and COWI designers already contain all geometric information, and reinforcement is modeled in model. The desire is therefore to make use of this information to a much greater extent. Furthermore, it is also considered which other technologies can be drawn into element production. With the help of Øyvind Svaland from EDR, the use of AR / MR is also used for visualization, quality assurance and communication.nb_NO
dc.language.isonobnb_NO
dc.publisherUniversitetet i Agder ; University of Agdernb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.subjectBYG508nb_NO
dc.titleEffektivisering av betongelementproduksjonen : Ved bruk av tegningsløs armering og prefabrikkert forskalingnb_NO
dc.typeMaster thesisnb_NO
dc.subject.nsiVDP::Teknologi: 500::Bygningsfag: 530::Arkitektur og bygningsteknologi: 531nb_NO
dc.subject.nsiVDP::Teknologi: 500::Materialteknologi: 520::Bygningsmaterialer: 525nb_NO
dc.source.pagenumber98 s.nb_NO


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal