Blar i Master's theses in Mechatronics på emneord "VDP::Teknologi: 500::Informasjons- og kommunikasjonsteknologi: 550::Teknisk kybernetikk: 553"
Viser treff 1-20 av 50
-
A Self-Contained Electro-Hydraulic Cylinder: Modeling, Control Design, Simulation and Experimental Validation
(Master thesis, 2018)In the constant effort to improve the efficiency of hydraulic systems, the pressure drop over hydraulic valves has been one of the major obstacles. In the Self-Contained Electro-Hydraulic Cylinder, the directional valve and ... -
Adaptive Backstepping Control of Quanser 2DOF Helicopter : Theory and Experiments
(Master thesis, 2019) -
Automatic Path Planning for Door-Milling Application Using an Industrial Robot
(Master thesis, 2018)This report covers automatic path planning for a 6 degree of freedom industrial robot used in a milling application. The kinematics are derived for the ABB IRB6600 robot used in this master thesis. Different sensors for ... -
Autonomous Container Handling : A solution for handling containers using state-of-the-art autonomous ground vehicles
(Master thesis, 2019)Konfidensiell til / confidential until 01.07.2024 -
Autonomous Pick-and-Place Procedure with an Industrial Robot Using Multiple 3D Sensors for Object Detection and Obstacle Avoidance
(Master thesis, 2021)This thesis proposes a full pipeline autonomous pick-and-place procedure, integrating perception, planning, grasping and control for execution of tasks towards long term industrial automation. Within perception, we demonstrate ... -
Bolts detection and a combination of conventional and reinforcement learning based control of UR5 industrial robot
(Master thesis, 2021)The main objective of this paper is to investigate the possibilities for using reinforcement learning to control a UR-5 robot. The paper also looks at how well reinforcement learning works to control a UR-5 robot. These ... -
Collaborative SLAM using a swarm intelligence-inspired exploration method
(Master thesis, 2020)Efficient exploration in multi-robot SLAM is a challenging task. This thesis describes the design of algorithms that would enable Loomo robots to collaboratively explore an unknown environment. A pose graph-based SLAM ... -
Condition monitoring of steel wire ropes
(Master thesis, 2018)By utilising the measurements from a commercial acoustic emission sensor system, magnetic tester and a camera system, conducted during four separate simple bending fatigue tests of steel wire ropes (SWR), several measurable ... -
Cost Effective Sensor Package for Road Monitoring
(Master thesis, 2019)The companies responsible for road maintenance are expecting an increase in number of roads.It is of interest to find effective solutions to adapt to the increased work in road maintenance.Most of the road monitoring has ... -
Design and Development of a Multi-Mode, Two-Wheeled, Self-Balancing Service Platform
(Master thesis, 2019)This thesis covers the design and development of a multi-mode, two-wheeled, self-balancing serviceplatform. The purpose of such a platform is to assist people with transportation tasks in crowdedspaces like airports by ... -
Design and Stiffness Analysis of a 5-axis Gantry-Tau Milling Machine
(Master thesis, 2018)The Gantry-Tau is a Parallel Kinematic Machine (PKM) structure that possesses many advantages as a milling machine, where it has a low moving mass, high stiffness and a large workspace to footprint ratio. This thesis ... -
Design and stiffness evaluation of a parallel kinematic machine
(Master thesis, 2021)Available from 01/07/2026 -
Design, Modelling and Simulation of Electro-Hydraulic Self-Contained Cylinders based on Digital Hydraulics
(Master thesis, 2018)Nowadays, hydraulic cylinders are mostly powered by a separate HPU and controlled by conventional servo and proportional valves. New trends have been under development the last years. The first trend is self-contained ... -
Developing a Free-Falling Robotic Cat With Righting Reflex
(Master thesis, 2020)Changing the orientation of a body in free fall is a useful skill, found in cats. The applicationsrange from zero-gravity in space to damage control of a falling object. This thesis aims to create arobot cat able to always ... -
Development of a Semi-autonomous Holonomic Load Carrier with Multi-camera Perception
(Master thesis, 2020)This thesis documents the development of a load carrier capable of carrying ten advanced personal robots. The robots of concern are Segway Robotics’ Loomo,which are used for education purposes at the University of Agder. ... -
Development of Genetic and GPU-Based Brute Force Algorithms for Optimal Sensor Placement
(Master thesis, 2018)Optimal sensor placement is a complicated task where several parameters have to be considered simultaneously. The problem has been a subject of much research in the last decades, but there does not seem to be a consensus ... -
Development of System for Deterrence of Animals using Artificial Intelligence
(Master thesis, 2021)This thesis is part of the Mechatronics masters program at the University of Agder (UiA). It describes the development of an animal deterrence system, using computer vision with embedded systems for edge computing. Household ... -
Digital Twin of 3d Motion Compensated Gangway Use of Unity Game Engine and TwinCAT PLC Control for Hardware-in-the-Loop Simulation
(Master thesis, 2021)This thesis presents the development, implementation, and testing of a digital twin representing a 3D compensated gangway located on a service operation vessel for wind farms The real-time simulator runs on a separate ...