Vis enkel innførsel

Experimental Evaluation of Extended Reality Technologies in the Development of Individualized Three-Dimensionally Printed Upper Limb Prostheses

dc.contributor.authorGórski, Filip
dc.contributor.authorŁabudzki, Remigiusz
dc.contributor.authorŻukowska, Magdalena
dc.contributor.authorSanfilippo, Filippo
dc.contributor.authorOttestad, Morten
dc.contributor.authorZelenay, Martin
dc.contributor.authorBăilă, Diana-Irinel
dc.contributor.authorPacurar, Razvan
dc.date.accessioned2024-02-12T10:06:33Z
dc.date.available2024-02-12T10:06:33Z
dc.date.created2023-09-21T10:33:13Z
dc.date.issued2023
dc.identifier.citationGórski, F., Łabudzki, R., Żukowska, M., Sanfilippo, F., Ottestad, M., Zelenay, M., Băilă, D.-I. & Pacurar, R. (2023). Experimental Evaluation of Extended Reality Technologies in the Development of Individualized Three-Dimensionally Printed Upper Limb Prostheses. Applied Sciences, 13 (14), Article 8035.en_US
dc.identifier.issn2076-3417
dc.identifier.urihttps://hdl.handle.net/11250/3116817
dc.description.abstractThis paper presents results from experimental studies that assess the utilization of virtual, augmented, and mixed reality (VR, AR, MR) at different stages of developing personalized 3D printed upper limb prostheses for adult patients. The prostheses are designed automatically using the AutoMedPrint system, leveraging 3D scans as described in various prior publications. Various stages of development of the prosthesis are made as applications of different extended reality technologies. An assembly instruction is implemented as an immersive VR application, a configurator is designed as AR application and a configurator and try-on application is prepared and deployed in MR. The applications are tested by an international group of experts during a scheduled experiment. The experts then participate to surveys and comparatively evaluate the potential of all the XR technologies. The paper presents the development of these applications, provides a detailed account of the experimental process, including the rankings of XR technologies for different applications throughout the lifecycle of a prosthetic device.en_US
dc.description.abstractExperimental Evaluation of Extended Reality Technologies in the Development of Individualized Three-Dimensionally Printed Upper Limb Prosthesesen_US
dc.language.isoengen_US
dc.publisherMDPIen_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleExperimental Evaluation of Extended Reality Technologies in the Development of Individualized Three-Dimensionally Printed Upper Limb Prosthesesen_US
dc.title.alternativeExperimental Evaluation of Extended Reality Technologies in the Development of Individualized Three-Dimensionally Printed Upper Limb Prosthesesen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.rights.holder© 2023 The Author(s)en_US
dc.subject.nsiVDP::Teknologi: 500en_US
dc.source.volume13en_US
dc.source.journalApplied Sciencesen_US
dc.source.issue14en_US
dc.identifier.doihttps://doi.org/10.3390/app13148035
dc.identifier.cristin2177515
dc.relation.projectUniversitetet i Agder: 2520898en_US
dc.source.articlenumber8035en_US
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail
Filnavn:
Article.pdf
Størrelse:
7.585Mb
Format:
PDF
Åpne

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal