Characterization and treatment of tunneling wastewater using natural and chemical coagulants
Peer reviewed, Journal article
Published version
View/ Open
Date
2023Metadata
Show full item recordCollections
Original version
Ghorbani Mooselu, M., Liltved, H. & Akhtar, N. (2023). Characterization and treatment of tunneling wastewater using natural and chemical coagulants. Water Science and Technology, 88(10), 2547-2565. https://doi.org/10.2166/wst.2023.363Abstract
Particles are a concern regarding tunneling wastewater, but gaps remain in understanding metal(loid)s content and coagulation efficiency. In this research, characterization of the wastewaters before and after treatment was investigated by chemical analysis and various techniques for particle characterization. Then, laboratory work was conducted to evaluate effectiveness of sedimentation and use of coagulants to remove particles and particle-associated contaminants. Both natural (chitosan) and chemical coagulants (ferric chloride sulfates and polyaluminium chloride solution), were applied in a jar test system. The results indicated that short-time sedimentation alone substantially reduced the particle content and particle-associated pollutants, including metal(loid)s, while subsequent chemical coagulation was required to comply with discharge limits. The optimum dosages of chitosan, PIX, and PAX for water 1 after pre-treatment (15 min sedimentation) were 1 mg/L, 3 mg Fe/L, and 3 mg Al/L, respectively, while a dosage of 2 mg Al/L gave the best results in water 3. Furthermore, chemical coagulation significantly decreased the volume density of particles in the diameter range of 1–100 μm, showing that coagulants are efficient for the removal of smaller particles not removed by conventional sedimentation.