Department of Engineering Sciences: Recent submissions
Now showing items 201-220 of 1119
-
Bruken av 3D-laserskanning i produksjonen av bygg
(Master thesis, 2023)The construction industry has vast potential for improving productivity and efficiency, and in the era of Construction 4.0 the spotlight has been put on the integration of state-of-the-art digital technologies and automation ... -
Bruken av 3D-laserskanning i produksjon av bygg
(Master thesis, 2023)The construction industry has vast potential for improving productivity and efficiency, and in the era of Construction 4.0 the spotlight has been put on the integration of state-of-the-art digital technologies and automation ... -
Digitalization in the building and construction industry
(Master thesis, 2023)The building and construction industry is one of the least digitalized industries globally. One of the reasons for the mentioned statement is due to the industry being conservative and maintaining traditional methods rather ... -
Digitalization in the building and construction industry
(Master thesis, 2023)The building and construction industry is one of the least digitalized industries globally. One of the reasons for the mentioned statement is due to the industry being conservative and maintaining traditional methods rather ... -
Developing a Novel Modeling Framework for Predicting the Performance of Offshore Wind Farms
(Master thesis, 2023)This thesis investigated the Anholt offshore wind farm, developed three distinct Deep Learning models for power prediction, and used SHAP values to explain the models’ predictions. Model 1 developed a submodel for each ... -
Stålbjelke og hulldekkeelementer i samvirkekonstruksjon
(Master thesis, 2023)The work with this project is the result of the Master’s Thesis at University of Agder, and mark the final subject for obtaining the degree Master of Science in the field of Civil and Structural Engineering. The report ... -
Stålbjelke og hulldekkeelementer i samvirkekonstruksjon
(Master thesis, 2023)This report is the result of Master’s Thesis at University of Agder, and mark the final subject for obtaining the degree Master of Science in the field of Civil and Structural Engineering. The report takes a close look ... -
Håndtering av overvann for et næringsområde
(Master thesis, 2023)This is a Master ́s Thesis that is a part of the Civil and Structural Engineering, Master's Programme. The Master ́s Thesis has the subject code BYG508. With a changing climate and development that will continue, it ... -
Visuell programmering ved design av fagverk i tre
(Master thesis, 2023)This master thesis deals with the use of visual programming and parametric design. The aim is to determine whether this can make the traditional process for structural design more efficient (for wooden structures). The ... -
Optimal capacity density of offshore wind farms : An analysis for the prospective wind energy projects in the North Sea
(Master thesis, 2023)The North Sea and Norwegian continental shelf have been identified to possess some of the world's best wind resources. Nine countries, including Norway, have signed the Ostend Declaration and established their offshore ... -
Overvann i praksis og lovverk
(Master thesis, 2023)This master’s thesis intends to investigate the municipal practice for storm water management in Norway. The following main research question is defined, in order to research this phenomenon: “What is the municipal practice ... -
Planleggingspraksis i byggeprosjekter
(Master thesis, 2023)This report is a master thesis, written in the fourth and last semester of the civil engineer program at the University of Agder. The master thesis studies and explores the current planning process in construction projects, ... -
Evaluering av gjennomførte prosjekter
(Master thesis, 2023)Dette er masteroppgave som tar for seg problemstillingen “Hvordan man oppnå bedre samsvar mellom planlegging og produksjon av veibygging? “. For å besvare dette forskerspørsmålet har det blitt formulert fem underspørsmål ... -
Effect of Rotor Tilt on the Performance of Floating Offshore Wind Turbines
(Master thesis, 2023)This thesis investigated the tilt loss of FOWT in conjunction with power performance. Consisting of three main parts, where the first calculates the power loss of three turbines influenced by tilt, the next part is the AEP ... -
Crowdfunding In Norway: Empirical Study Examining Entrepreneurs' Intentions to Use Crowdfunding
(Master thesis, 2023)This master's thesis investigates the drivers and inhibitors influencing the intention of entrepreneurs to use crowdfunding as a financing method, with a focus on the potential distinctions between native and immigrant ... -
LATERAL EARTH PRESSURE, SLOPE STABILITY AND PILE SHEETING (Sheet piled constructions)
(Master thesis, 2023)This master thesis studies about how the sheet pile walls resist the lateral earth pressures on slope area. Sheet pile walls are one type of construction elements that are built by a continuous interlocking of pile ... -
Climate Change Impact on the Hydropower Potential in Agder County
(Master thesis, 2023)Climate change poses significant uncertainties for the future of hydropower, both in terms of challenges and opportunities. This study uses an educational version of the HBV model to investigate climate change impact on ... -
Design and analysis of a shared mooring system for a dual-spar floating offshore wind farm
(Master thesis, 2023)In order to lower mooring costs, this master's thesis examines the technical and economic feasibility of a shared mooring system for a dual-spar Floating Offshore Wind Farm (FOWF) in the North Sea area. The suggested ... -
Evaluering av gjennomførte prosjekter
(Master thesis, 2023)Dette er masteroppgave som tar for seg problemstillingen “Hvordan man oppnå bedre samsvar mellom planlegging og produksjon av veibygging? “. For å besvare dette forskerspørsmålet har det blitt formulert fem underspørsmål ... -
Visuell programmering ved design av fagverk i tre
(Master thesis, 2023)This master thesis deals with the use of visual programming and parametric design. The aim is to determine whether this can make the traditional process for structural design more efficient (for wooden structures). The ...