Blar i Department of Engineering Sciences på tittel
Viser treff 581-600 av 1096
-
Life Cycle Assessment of a Battery Passenger Ferry
(Master thesis, 2017)Konfidensiell til / confidential until 01-07-2022 -
Life Cycle Assessment of an Ambitious Renovation of a Norwegian Apartment Building to nZEB Standard
(Journal article; Peer reviewed, 2018)The upgrading of building infrastructure to modern standards represents a key tool for reducing global energy demand and emissions from buildings. In Norway, building upgrades have been prioritized despite the relatively ... -
Life Cycle Assessment of road construction: A case study of the E39 Betna-Hestnes road project in Norway
(Master thesis, 2023)This master thesis assesses the environmental impacts caused by constructing E39 Betna-Hestnes Road Project in Trøndelag County, Norway, by using LCA methodology. additionally, this thesis seeks to identify potential ... -
Life cycle cost analysis of a floating wind farm in the Norwegian Sea
(Peer reviewed; Journal article, 2023)The offshore wind energy industry has witnessed rapid growth in the past decade. Still, there is a lack of commercial floating wind projects due to the relatively high development costs and other factors. To facilitate the ... -
Lifetime Based Health Indicator for Bearings using Convolitional Neural Networks
(Master thesis, 2019)Out of all the components in rotating electrical machinery, bearings have the highest failure rate. Bearingdegradation is a seemingly random process which is hard to both model and predict. Countless of ... -
A linear matrix inequality approach to robust fault detection filter design of linear systems with mixed time-varying delays and nonlinear perturbations
(Journal article; Peer reviewed, 2010)In this paper, the problem of robust fault detection filter (RFDF) design for a class of linear systems with some nonlinear perturbations and mixed neutral and discrete time-varying delays is investigated. By using a ... -
Linearized Piecewise Affine in Control and States Hydraulic System: Modeling and Identification
(Chapter; Peer reviewed, 2018) -
Livsløpsvurdering av geopolymerbetong lagd med avgangsmasser fra ilmenittgruvedrift
(Master thesis, 2022)Global CO2 emissions from cement production represent a major challenge on the path towards a future of net zero emissions. Alternative concrete binders are therefore being developed, and one such binder is called geopolymer ... -
Livsløpsvurdering og dimensjonering av stålog limtrebue i en nettverksbuebru
(Master thesis, 2016)This master thesis focuses on the design and life cycle assessment (LCA) of a network arch bridge. The arch is designed and compared by using two different materials, steel and gluelam. This study is carried out on the ... -
Livssyklusanalyse (LCA) av vegger i bindingsverk med kontinuerlig isolasjon : En sammenlignende LCA-studie av ytterveggsystemer i tre for miljøoptimalisering
(Master thesis, 2020)The building industry istaking measures in order to reduce its large carbon footprint. However, even more ecofriendly building solutions need to be used. External walls are constructed with a great usage of materials -in ... -
An LMI approach to quantized H∞ control of uncertain linear systems with network-induced delays
(Chapter; Peer reviewed, 2010)his paper deals with a convex optimization approach to the problem of robust network-based Hinf control for linear systems connected over a common digital communication network with norm-bounded parameter uncertainties. ... -
LMI-based H∞ synchronization of second-order neutral master-slave systems using delayed output feedback control
(Peer reviewed; Journal article, 2009)The H∞ synchronization problem of the master and slave structure of a second-order neutral master-slave systems with time-varying delays is presented in this paper. Delay-dependent sufficient conditions for the design of ... -
Load mitigation method for wind turbines during emergency shutdowns
(Peer reviewed; Journal article, 2021)Wind turbines experience countless shutdowns during their lifetimes. A shutdown is a transient process characterised by a pitch-to-feather manoeuvre of three blades. Such a pitch manoeuvre is often collective, open-loop, ... -
Local Capacity Control for Production Networks of Autonomous Work Systems With Time-Varying Delays
(Journal article; Peer reviewed, 2010)This paper considers the problem of local capacity H infinity control for a class of production networks of autonomous work systems with time-varying delays in the capacity changes. The system under consideration is modeled ... -
Locally Produced UHPC : The Influence of Type and Content of Steel Fibres
(Journal article; Peer reviewed, 2021)Ultra-high performance concrete might be a competitive alternative to normal concrete for some purposes. But despite research efforts during decades, utilisation is still not widespread. Reasons include limited competence ... -
Long Arm Manipulator Path Interpolation Using 4th Order B-Splines
(Chapter; Peer reviewed, 2018) -
Long term stability testing of oxide unicouple thermoelectric modules
(Peer reviewed; Journal article, 2019) -
LQG control design for balancing an inverted pendulum mobile robot
(Journal article; Peer reviewed, 2011)The objective of this paper is to design linear quadratic controllers for a system with an inverted pendulum on a mobile robot. To this goal, it has to be determined which control strategy delivers better performance with ... -
Machine learning and IMU: Smart Gait applications for use in real-time systems
(Master thesis, 2024)Inertial Measurement Units hold a great potential for real-time gait phase measurements, gait kinematics measurement, and gait analysis. They offer convenience in the form of their light weight and portability. There are ... -
Machine learning and ontology in eCoaching for personalized activity level monitoring and recommendation generation
(Peer reviewed; Journal article, 2022)