Vis enkel innførsel

dc.contributor.authorIdrees, Muhammad
dc.contributor.authorKhalid, Sohail
dc.contributor.authorRehman, Muhammad Abdul
dc.contributor.authorSajid Ullah, Syed
dc.contributor.authorHussain, Saddam
dc.contributor.authorIqbal, Jawaid
dc.date.accessioned2023-11-16T12:28:55Z
dc.date.available2023-11-16T12:28:55Z
dc.date.created2023-11-13T08:48:14Z
dc.date.issued2023
dc.identifier.citationIdrees, M., Khalid, S., Rehman, M. A., Sajid Ullah, S., Hussain, S. & Iqbal, J. (2023). Design of Multiplexers for IoT-Based Applications Using Stub-Loaded Coupled-Line Resonators. Micromachines, 14 (10).en_US
dc.identifier.issn2072-666X
dc.identifier.urihttps://hdl.handle.net/11250/3102993
dc.description.abstractThis paper presents the design of microstrip-based multiplexers using stub-loaded coupled-line resonators. The proposed multiplexers consist of a diplexer and a triplexer, meticulously engineered to operate at specific frequency bands relevant to IoT systems: 2.55 GHz, 3.94 GHz, and 5.75 GHz. To enhance isolation and selectivity between the two passband regions, the diplexer incorporates five transmission poles (TPs) within its design. Similarly, the triplexer filter employs seven transmission poles to attain the desired performance across all three passbands. A comprehensive comparison was conducted against previously reported designs, considering crucial parameters such as size, insertion loss, return loss, and isolation between the two frequency bands. The fabrication of the diplexer and triplexer was carried out on a compact Rogers Duroid 5880 substrate. The experimental results demonstrate an exceptional performance, with the diplexer exhibiting a low insertion loss of 0.3 dB at 2.55 GHz and 0.4 dB at 3.94 GHz. The triplexer exhibits an insertion loss of 0.3 dB at 2.55 GHz, 0.37 dB at 3.94 GHz, and 0.2 dB at 5.75 GHz. The measured performance of the fabricated diplexer and triplexer aligns well with the simulated results, validating their effectiveness in meeting the desired specifications.en_US
dc.language.isoengen_US
dc.publisherMDPIen_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleDesign of Multiplexers for IoT-Based Applications Using Stub-Loaded Coupled-Line Resonatorsen_US
dc.title.alternativeDesign of Multiplexers for IoT-Based Applications Using Stub-Loaded Coupled-Line Resonatorsen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.rights.holder© 2023 The Author(s)en_US
dc.subject.nsiVDP::Teknologi: 500en_US
dc.subject.nsiVDP::Teknologi: 500::Bygningsfag: 530en_US
dc.source.volume14en_US
dc.source.journalMicromachinesen_US
dc.source.issue10en_US
dc.identifier.doihttps://doi.org/10.3390/mi14101821
dc.identifier.cristin2195471
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal