Department of Engineering Sciences: Nye registreringer
Viser treff 481-500 av 1119
-
Integrated drawingless workflow from design to installation
(Master thesis, 2021)In this master thesis, a methodology for demonstrating both the traditional and the digitalization of reinforcement production’s process for a structural system in an apartment building has been investigated. The purpose ... -
Etteroppspenning av plattendekke
(Master thesis, 2021)In this master thesis, the use of post-tensioned lattice girder slabs has been investigated. By use of non-prestressed or pre-tensioned reinforcement, the usual span-width of lattice girder slabs are from 7 to 10.5 meters. ... -
Bruk av FEM-modellering til kapasitetsundersøkelser av momentoverførende knutepunkter i stål
(Master thesis, 2021)Eurocode 3 provides a rough analytical method to estimate the capacity of a steel joint by derivingthe overall behavior from its components. Numerical methods such as the finite element method(FEM) enable accurate simulation ... -
Design and Analysis of a Novel Semi-submersible Floater Supporting a 5MW Wind Turbine
(Master thesis, 2021)The wind industry has been rapidly evolving in recent years, moving from onshore to offshorelocations. For deep waters, floating wind turbines are more cost-effective than bottom-fixed ones,and semi-submersible floating ... -
Experimental Investigation into the Effect of Pyrolysis on Chemical Forms of Heavy Metals in Sewage Sludge Biochar (SSB), with Brief Ecological Risk Assessment
(Peer reviewed; Journal article, 2021) -
A probabilistic long-term framework for site-specific erosionanalysis of wind turbine blades: A case study of 31 Dutch sites
(Peer reviewed; Journal article, 2021)Rain-induced leading-edge erosion (LEE) of wind turbine blades (WTBs) is associated with high repair and maintenance costs. The effects of LEE can be triggered in less than 1 to 2 years for some wind turbine sites, whereas ... -
Review on Modeling and Control of Flexible Link Manipulators
(Journal article; Peer reviewed, 2020) -
An analysis of Model Predictive Control with Integral Action applied to Digital Displacement Cylinders
(Journal article; Peer reviewed, 2020)This article aims to analyze Model Predictive Control (MPC) for the control of multi-chamber cylinders. MPC with and without integral action has been introduced. Three different algorithms have been used to solve the ... -
Effects of Onshore and Offshore Environmental Parameters on the Leading Edge Erosion of Wind Turbine Blades : A Comparative Study
(Journal article; Peer reviewed, 2021)The presence of rain-induced leading edge erosion of wind turbine blades necessitates the development of erosion models. One of the essential parameters for erosion modelling is the relative impact velocity between rain ... -
Numerical Study on the Heading Misalignment and Current Velocity Reduction of a Vessel-Shaped Offshore Fish Farm
(Journal article; Peer reviewed, 2019) -
Optimal nonlinear damping control of second-order systems
(Journal article; Peer reviewed, 2021)Novel nonlinear damping control is proposed for second-order systems. The proportional output feedback is combined with the damping term which is quadratic to the output derivative and inverse to the set-point distance. ... -
Considerations on factors affecting biocarbon densification behavior based on a multiparameter model
(Journal article; Peer reviewed, 2021)The optimization of upscaled biochar pelleting is limited by lack of knowledge regarding the effects of process parameters. A multiparameter model, coupled to a single pellet press unit, was for the first time applied to ... -
Daugavet- and delta-points in Banach spaces with unconditional bases
(Journal article; Peer reviewed, 2021) -
Fabrication of a Silicide Thermoelectric Module Employing Fractional Factorial Design Principles
(Journal article; Peer reviewed, 2021) -
Hydrothermal liquefaction of wood using a modified multistage shrinking-core model
(Journal article; Peer reviewed, 2020) -
Techno-economic analysis of a local district heating plant under fuel flexibility and performance
(Journal article; Peer reviewed, 2016) -
Future district heating plant integrated with municipal solid waste (MSW) gasification for hydrogen production
(Journal article; Peer reviewed, 2019) -
Process analysis of a biomass-based quad-generation plant for combined power, heat, cooling, and synthetic natural gas production
(Journal article; Peer reviewed, 2015) -
Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: A parametric study
(Peer reviewed; Journal article, 2020) -
Two-Dimensional Numerical Modelling of a Moored Floating Body under Sloping Seabed Conditions
(Peer reviewed; Journal article, 2020)