Blar i Department of Engineering Sciences på tittel
Viser treff 727-746 av 1069
-
On the Influence of Cross-Section Size on Measured Strength of SLM-Produced AlSi10Mg-Alloy
(Peer reviewed; Journal article, 2022)The freedom in choice of geometries in additive manufacturing (AM) favors the use of structures with large surface and small cross-section such as lattice structures and thin-walled hollow profiles. On the other hand, the ... -
On the multipeakon dissipative behavior of the modified coupled camassa-holm model for shallow water system
(Journal article; Peer reviewed, 2013)This paper investigates the multipeakon dissipative behavior of the modified coupled two-component Camassa-Holm system arisen from shallow water waves moving. To tackle this problem, we convert the original partial ... -
On the self-heating behavior of upgraded biochar pellets blended with pyrolysis oil: Effects of process parameters
(Peer reviewed; Journal article, 2020) -
On the timing between terrestrial gamma ray flashes, radio atmospherics, and optical lightning emission
(Journal article; Peer reviewed, 2017)On 25 October 2012 the Reuven Ramaty High Energy Solar Spectroscope Imager (RHESSI) and the Tropical Rainfall Measuring Mission (TRMM) satellites passed over a thunderstorm on the coast of Sri Lanka. RHESSI observed a ... -
On the Variability of the Temperature Coefficients of mc-Si Solar Cells with Irradiance
(Journal article; Peer reviewed, 2016) -
On-Line Oil Condition Monitoring for Marine Gearboxes : This thesis addresses the importance of oil condition monitoring in marine reduction gearboxes and compares the sensitivity and usage of three different sensors, each with its own working principle
(Master thesis, 2020)Failures in marine reduction gearboxes lead to substantial costs. With the use of oil condition moni-toring, these failures can be foreseen so that preemptive measures can be taken. The development ofoil condition monitoring ... -
Online Calibration Of Multiple Lidars
(Master thesis, 2022) -
Online Deflection Compensation of a Flexible Hydraulic Loader Crane Using Neural Networks and Pressure Feedback
(Journal article; Peer reviewed, 2022) -
Online dimensional control of rolled steel profiles using projected fringes
(Journal article; Peer reviewed, 2020) -
Open-Source Face Recognition Frameworks: A Review of the Landscape
(Peer reviewed; Journal article, 2022) -
Optical modelling for photovoltaic panels
(Master thesis, 2013)A novel approach to predict the performance of anti-reflective glasses on PV panel is presented in this thesis. Anti-reflective glass, such as deeply textured and thin film coated glass, has shown to increase the annual ... -
Optimal capacity density of offshore wind farms : An analysis for the prospective wind energy projects in the North Sea
(Master thesis, 2023)The North Sea and Norwegian continental shelf have been identified to possess some of the world's best wind resources. Nine countries, including Norway, have signed the Ostend Declaration and established their offshore ... -
Optimal Clustering and Layout of Norhy- brid Vertical Axis Wind Turbine Farms
(Master thesis, 2023)This work presents an approach for optimizing Vertical Axis Wind Turbine (VAWT) clusters and Wind Farm Layout Optimization (WFLO), employing a combination of Computational Fluid Dynamics (CFD) simulations and a Genetic ... -
Optimal damping coefficient for a class of continuous contact models
(Peer reviewed; Journal article, 2020)In this study, we develop an analytical formula to approximate the damping coefficient as a function of the coefficient of restitution for a class of continuous contact models. The contact force is generated by a logical ... -
Optimal design of complex passive-damping systems for vibration control of large structures: An energy-to-peak approach
(Journal article; Peer reviewed, 2014)We present a new design strategy that makes it possible to synthesize decentralized output-feedback controllers by solving two successive optimization problems with linear matrix inequality (LMI) constraints. In the initial ... -
Optimal guaranteed cost control of a class of discrete-time nonlinear systems with Markovian switching and mode-dependent mixed time delays
(Journal article; Peer reviewed, 2013)The guaranteed cost control problem is investigated for a class of nonlinear discrete-time systems with Markovian jumping parameters and mixed time delays. The mixed time delays involved consist of both the mode-dependent ... -
Optimal integration of wind energy with a renewable based microgrid for industrial applications.
(Master thesis, 2022)Wind energy in urban environments is a rapidly developing technology influenced by the terrain specifications, local wind characteristics and urban environments such as buildings architecture. The urban terrain is more ... -
Optimal nonlinear damping control of second-order systems
(Journal article; Peer reviewed, 2021)Novel nonlinear damping control is proposed for second-order systems. The proportional output feedback is combined with the damping term which is quadratic to the output derivative and inverse to the set-point distance. ... -
Optimal power tracking for autonomous demand side management of electric vehicles
(Journal article; Peer reviewed, 2022) -
Optimal samleskinnekonfigurasjon for 66-420 kV-anlegg
(Master thesis, 2023)Blant viktige byggestener i kraftnettet er transformatorstasjonene. Disse består av samleskinner, transformatorer, effektbrytere samt andre komponenter. Samleskinnene og de tilkoblede komponentene utgjør samleskinnekonfi ...