• Avstivningsevnen til sammensatte veggelementer av limtre 

      Bergsagel, Daniel; Buø, Tone; Endresen, Hans Petter (Master thesis, 2022)
      In recent years, the use of timber in large structures has increased, partly because of its good environmental properties. One wood-based product that has emerged is the HBE-element, which practically is a 580mm high glulam ...
    • Avstivningsevnen til sammensatte veggelementer av limtre 

      Bergsagel, Daniel; Buø, Tone; Endresen, Hans Petter (Master thesis, 2022)
      In recent years, the use of timber in large structures has increased, partly because of its good environmental properties. One wood-based product that has emerged is the HBE-element, which practically is a 580mm high glulam ...
    • DIC and Cohesive FE-analysis of glulam beams with two large, circular holes 

      Nygren, Philip (Master thesis, 2022)
      Introducing a large hole into a load-bearing timber beam causes stress concentrations in the hole vicinity. Tensile stress perpendicular to the grain presents a particular crack initiation and propagation risk. Unfortunately, ...
    • Fatigue crack growth in mooring chain steel at different mean load levels 

      Hellum, Vidar; Gabrielsen, Øystein; Ås, Sigmund Kyrre (Peer reviewed; Journal article, 2023)
      The fatigue crack growth rates of R4 mooring chain steel at different R-ratios are investigated. Crack growth experiments are performed at three different R-ratios, 0.1, 0.3 and 0.7, utilizing compact tension specimens in ...
    • Ikke-Lineær Elementanalyse av Pipe-Support Utsatt For Ulykkeslast 

      Amundsen, Mats Halleraker; Justad, Bjørgvin (Master thesis, 2024)
      Offshore structures may be some of the most complex structures and are subjected to va- rious and complex loads. Design of such structures is therefore off extreme importance to ensure the safety of workers and the ...