Blar i Master's theses in Civil and Structural Engineering på emneord "VDP::Teknologi: 500::Materialteknologi: 520"
Viser treff 1-7 av 7
-
Design av en offshore gangbru i fiberarmert polymer
(Master thesis, 2018)Innovation and development are essential for a market in demand of faster, lighter and stronger solutions. As a material with high strength to weight ratio, and good possibilities of being premade, fiber reinforced ... -
Nytt resirkulert tilslag produsert fra grave- og byggavfall
(Master thesis, 2020)Recycled aggregate produced from excavation and construction waste is an important resource. This is because increased use of recycled aggregate will contribute to reduce the amount of waste delivered to landfill, which ... -
Post weld heat treatment of welded low alloyed steel pipes : Use of AISI 4130 steel in hydrogen sulfide environment and its post weld heat treatment conditions
(Master thesis, 2019)Based on the results from pre-projectand workcovered by this thesis, no better alternatives to AISI 4130 material was found, neither could it be safely concluded for removal of NACE MR0175/ISO 15156 requirementsin any parts ... -
Silica Green Stone as an SCM in concrete paving stones production : In order to reduce the total environmental footprint
(Master thesis, 2021)The cement industry is responsible for around 7% of the global CO2 emissions. Reducing this number has been on the forefront of the industry's mind for decades, but even with constant improvement and constant reduction in ... -
Skjærkapasitet av ultrahøyfast fiberarmert betong – verifikasjon av designstandard
(Master thesis, 2018)Ultra High Performance Fiber Reinforced Concrete (UHPFRC) is a concrete that is still not in use in Norway. This is, as the name implies, a strong concrete, with high ductility from the fibres. To be able to use this ... -
UHPC i norsk brobygging
(Master thesis, 2020)