Blar i Master's theses in Civil and Structural Engineering på emneord "VDP::Teknologi: 500::Bygningsfag: 530::Arkitektur og bygningsteknologi: 531"
Viser treff 1-14 av 14
-
Analysing UHPFRC beams with the help of ANSYS
(Master thesis, 2018)This Master thesis is about analysis of Ultra-high performance fibre reinforced concrete (UHPFRC) beams with the help of the Finite Element Analysis software ANSYS. The research question and the operational questions ... -
Design av en offshore gangbru i fiberarmert polymer
(Master thesis, 2018)Innovation and development are essential for a market in demand of faster, lighter and stronger solutions. As a material with high strength to weight ratio, and good possibilities of being premade, fiber reinforced ... -
Digitalisering og Implementering av BIM : Med kontraktuelle muligheter
(Master thesis, 2020) -
Dimensjonering av slank balkong i Ultra-High Performance Fibre-Reinforced Concrete
(Master thesis, 2017)As part of the fifth and final year in civil engineering at University of Agder, this master’s thesis has been composed. This report was written during the spring semester of 2017. The purpose of this thesis was to dimension ... -
Effektivisering av betongelementproduksjonen : Ved bruk av tegningsløs armering og prefabrikkert forskaling
(Master thesis, 2018)Technology evolves exponentially, and technological aids follow the same course. Manufacturing methods in the construction industry are also constantly evolving, and a company that wishes to follow this development is ... -
Inneklima og energibruk ved bruk av balansert ventilasjon vs. hybrid ventilasjon i nybygg i massivtre : Skonnertveien Hageby
(Master thesis, 2018)Most apartment buildings today are installed with mechanical balanced ventilation. A measure to reduce energy consumption and still satisfy the demand for heating is to apply hybrid ventilation. That includes using natural ... -
Jordskjelvanalyse av dekkekonstruksjoner i fleretasjes bygg : En studie av konsekvenser ved usikkerhet i prosjekteringsgrunnlag, og vurdering av kostnadseffektive prosesser og løsninger
(Master thesis, 2018)This master-thesis investigates the effects on multi-story buildings generated by seismic loading and the potential diversity of results based on wrong assumptions in an early stage of engineering. A point of focus has ... -
Kostnad- og miljøanalyse av et leilighetskompleks : En sammenligning mellom massivtre og konvensjonelle løsninger i et moderne byggeprosjekt
(Master thesis, 2018)Konfidensiell til / confidential until 01.07.2023 -
Krysslaminert massivtre som bærende struktur i modulbaserte studentboliger : FEM analyse av modulbaserte studentboliger i krysslaminert massivtre
(Master thesis, 2021)This is a master’s thesis conducted at the University in Agder as the finishing work for the subject BYG508 and the master program in civil and structural engineering. This report seeks to examine some possibilities that ... -
Rehabilitering av antikvarisk betongkonstruksjon fra perioden 1926-1938 : Vurdering av rehabiliteringstiltak og restkapasitet for Ingierstrand bad, basert på prøveresultater, dagens standard og standarden gjeldende i 1926-1938
(Master thesis, 2017)Traditionally restoration of antiquarian concrete constructions has been a prominent topic in Norwegian context. This topic has been given more attention, as more concrete constructions and reinforced concrete constructions ... -
Samvirkekonstruksjoner av stål og betong i boligbygg : Dimensjonering og modellering med hensyn til preakseptering, Eurokode 4 og numerisk analyse
(Master thesis, 2021)Interaction between steel and concrete, and its effect on moment capacity and flexural stiffness was investigated through the subject BYG507 - Preliminary Project to the Masters Thesis. As a continuation of the preliminary ... -
Standardisering av brokonstruksjoner for nasjonale hovedveier
(Master thesis, 2017)Standardization is currently not being utilized much in the Norwegian road building industry compared to the rest of the construction industry and road construction abroad. To harvest the potential benefits, it is interesting ... -
Standardiserte konstruksjonselementer av fiberarmert polymer for vegbru : Design og dimensjonering av elementer for standardisering og bruk i vegbruer
(Master thesis, 2017)This thesis is addressing the possibility for use of fiber reinforced polymers (FRP) in bridge constructions in Norway. The aim is to design an FRP section that can perform as both structural support and decking on the ... -
Use of BIM Technology and 3D-Modeling to Automate the Paperless Reinforcement Production
(Master thesis, 2018)Although, Building Information Modeling has flourishing development for reinforced concrete, still there is a long way to achieve efficient performance throughout reinforcement supply chain. Statsbygg through the use of ...