• Effekten av fotoreaktivering og partikkelinnhold ved UV-desinfeksjon av renset avløpsvann 

      Demaj, Almir; Albrigtsen, Kevin; Lund, Vebjørn Bråthe (Master thesis, 2022)
      UV-disinfection as a treatment method is well suited for wastewater treatment plants of medium size or smaller and is an effective way to inactivate microorganisms. However, the treatment method is dependent on factors ...
    • Effekten av fotoreaktivering og partikkelinnhold ved UV-desinfeksjon av renset avløpsvann 

      Lund, Vebjørn Bråthe; Demaj, Almir; Albrigtsen, Kevin (Master thesis, 2022)
      UV-disinfection as a treatment method is well suited for wastewater treatment plants of medium size or smaller and is an effective way to inactivate microorganisms. However, the treatment method is dependent on factors ...
    • Effektivisering av betongelementproduksjonen : Ved bruk av tegningsløs armering og prefabrikkert forskaling 

      Røksland, Anniken Ophaug (Master thesis, 2018)
      Technology evolves exponentially, and technological aids follow the same course. Manufacturing methods in the construction industry are also constantly evolving, and a company that wishes to follow this development is ...
    • En risikovurdering ved bruk av svalgang som rømningsvei : bruk av FDS til å undersøke brannsikkerheten ved fravikelser fra preaksepterte ytelser 

      Fikse, Fredrik (Master thesis, 2016)
      The purpose of this master thesis is to investigate the tenability limits on the egress path on an access balcony when not following all the given pre accepted solutions. The analysis construction deviates from some of the ...
    • Energieffektivisering av eksisterende kontorbygninger 

      Skaiå, Julie (Master thesis, 2023)
      Bygninger står for rundt 40 % av verdens totale energibruk og for mer enn halvparten av Norges elektrisitetsbehov. Mesteparten av verdens bygningsmasse i 2050 eksisterer i dag og rundt 75 % av denne bygningsmassen i EU er ...
    • Enhancing Material Reduction in the Construction Industry Through Modern Technologies 

      Hindar, Silje Kristine (Master thesis, 2022)
      The problem area of this master thesis is how can modern technologies be utilized in bespoke concrete construction to reduce material mass and incorporate traditional architectural features into today's construction industry ...
    • Etteroppspenning av plattendekke 

      Bjålid, Erik; Mysen, Morten Ianssen (Master thesis, 2021)
      In this master thesis, the use of post-tensioned lattice girder slabs has been investigated. By use of non-prestressed or pre-tensioned reinforcement, the usual span-width of lattice girder slabs are from 7 to 10.5 meters. ...
    • Evaluering av gjennomførte prosjekter 

      Gengatharan, Dilip; Wilson Uthayathas, Winhojan (Master thesis, 2023)
      Dette er masteroppgave som tar for seg problemstillingen “Hvordan man oppnå bedre samsvar mellom planlegging og produksjon av veibygging? “. For å besvare dette forskerspørsmålet har det blitt formulert fem underspørsmål ...
    • Evaluering av gjennomførte prosjekter 

      Gengatharan, Dilip; Uthayathas, Winhojan Wilson (Master thesis, 2023)
      Dette er masteroppgave som tar for seg problemstillingen “Hvordan man oppnå bedre samsvar mellom planlegging og produksjon av veibygging? “. For å besvare dette forskerspørsmålet har det blitt formulert fem underspørsmål ...
    • Experimental and finite element analysis of the shear behaviour of UHPC beams 

      Hosamo, Haidar; Sarwari, Perooz (Master thesis, 2019)
      The flexural behavior of reinforced concrete beams isobviously defined and can be managed with reasonableaccuracy.However, a solution has not been obtained for the shear capacity of beams, especially those without shear ...
    • Fiberarmert betong i bærende konstruksjoner : Beregningsmodeller og eksperimentelle undersøkelser 

      Salice, Veronica Eek; Kråkenes, Bendik Selmer-Anderssen; Fauske, Bjørnar Hognestad (Master thesis, 2021)
      This report is a master’s thesis with the main topic of fiber reinforced concrete. This area ofresearch is relevant due to demands of a decrease in the emissions of greenhouse gases, demandsfor rational execution, a need ...
    • Fiberarmert betong i vegg- og bjelkeelementer: Prøving og sammenligning av fullskala vegg og praktiske laboratorieresultater 

      Lilletvedt, André (Master thesis, 2022)
      This report is written as a final thesis for a master's degree in civil engineering at the University of Agder. The scope of this report is fiber-reinforced concrete in walls and especially fiber-reinforced concrete in a ...
    • Fiberensegenskaper i brudd- og bruksgrensetilstand 

      Pashay, Farid (Master thesis, 2022)
      The master's thesis is written in collaboration with the project FiberCon. The purpose of the project is to develop solution methods that are sustainable and economical for concrete structures. The master's thesis is about ...
    • Filtrering og UV-bestråling - veien fra avløpsvann til vanningsvann 

      Granlund, Maria; Klausen, Susanne Styve (Master thesis, 2022)
      As world water demand grows, its reclamation and reuse becomes increasingly important. It is expected that global demand for water will exceed supply by 40% in 2030. In addition, it is expected that the world population ...
    • Gjenåpning av lukket bekk 

      Nicole Pilar Castillo (Master thesis, 2022)
      Climate change has led to more frequent and faster precipitation events, which create major challenges in stormwater. the wiring is outdated and undersized and the urbanized area consists mainly of dense surfaces, which ...
    • Håndtering av overvann for et næringsområde 

      Ekra, Bjørnar Hovstad (Master thesis, 2023)
      This is a Master ́s Thesis that is a part of the Civil and Structural Engineering, Master's Programme. The Master ́s Thesis has the subject code BYG508. With a changing climate and development that will continue, it ...
    • Herdeteknologi - modellering av betonges temperatur - og fasthetsutvikling 

      Shah Mahmoud, Baryalay; Miri, Jawid; Karimi, Mohammad Hassan (Master thesis, 2023)
      For many years, Heidelberg Materials Cement Norway has offered the Norwegian concrete market the curing technology software HETT97. This software is a planning tool for simulating temperature and strength development in ...
    • Herdeteknologi – modellering av betongens temperatur- og fasthetsutvikling 

      Shah Mahmoud, Baryalay; Miri, Jawid; Karimi, Mohammad Hassan (Master thesis, 2023)
      For many years, Heidelberg Materials Cement Norway has offered the Norwegian concrete market the curing technology software HETT97. This software is a planning tool for simulating temperature and strength development in ...
    • Herdeteknologi – modellering av betongens temperatur- og fasthetsutvikling 

      Shah Mahmoud, Baryalay; Miri, Jawid; Karimi, Mohammad Hassan (Master thesis, 2023)
      For many years, Heidelberg Materials Cement Norway has offered the Norwegian concrete market the curing technology software HETT97. This software is a planning tool for simulating temperature and strength development in ...
    • Hva kjennetegner et risikofylt byggeprosjekt? 

      Dahlberg, Joakim; Øksenholt, Johan (Master thesis, 2022)
      Risk management has been a severe tool in the construction industry for several decades. Not only in terms of health, environment and security, but profitability and viability as well. The industry is exposed for an ...