Predicting the fatigue damage evolution in welded steel joints
Doctoral thesis
Published version
Permanent lenke
https://hdl.handle.net/11250/3146086Utgivelsesdato
2024Metadata
Vis full innførselSamlinger
Originalversjon
Mikulski, Z. J. (2024). Predicting the fatigue damage evolution in welded steel joints [Doctoral dissertation]. University of Agder.Sammendrag
The present thesis is investigating the fatigue damage evolution in welded steel joints subjected to dynamic repetitive loading. The work embraces various joint geometries and loading modes. The focus is on the fatigue damage occurring at the weld toe in fillet welded attachments. The work is mainly focusing on joints subjected to constant amplitude (CA) loading but some considerations for variable amplitude (VA) loading are also included. The damage mechanisms involved are discussed and modelled both for the initiation phase and the subsequent crack growth phase. The basic theories for these phases are examined and discussed and new models and prediction methods are proposed. The focus is on the probabilistic modelling such that the large scatter found in the fatigue damage evolution can be accounted for. An advanced probabilistic model for life predictions designated the Random Fatigue-Limit Model (RFLM) is fitted to the experimental data. The model is suggested as a support and even as an alternative to the conventional SN curves currently recommended for fatigue life predictions in the building codes. The proposed RFLM is enhanced such that it can explicitly account for the mean stress effect for a given applied stress range. A distinction is made between the initiation phase and the crack growth phase regarding the impact from the mean stress. Data from experimental investigations are collected and used to corroborate the proposed models and applied calculation methodologies. Additional experimental work with test series for fillet welded longitudinal attachments is carried out as a supplement to the collected life data. For this test series both the initiation phase and the crack growth phase are monitored by an Alternating Current Potential Drop (ACPD) method. Possible improvements of the models are suggested based on this empirical background. The present work provides new knowledge regarding:
• How to describe and model the entire damage evolution in welded joints.
• The importance and the modelling of the crack initiation phase in the joints.
• Realistic fatigue crack propagation model for cracks emanating from the weld toe region.
• Advanced statistical analysis of life data from tests such that improved fatigue resistance curves under constant amplitude loading are obtained.
• The increased scatter in fatigue lives at very low stress ranges.
• The compatibility between probabilistic models and underlying physical models.
• Damage accumulation modelling under variable amplitude loading.
• How to handle the impact of mean stress effect for a given stress range.
The presentation of the above topics must necessarily be limited in the present summary and overview document. The reader can find more important details for the modelling carried out and more elaborated explanations in the international publications that have been generated from the present research work. These publications are listed in the next section and are also found in the appendices.
Består av
Paper I: Mikulski, Z., Hellum, V. & T. Lassen, (2017). Modelling the fatigue damage evolution in welded joints. Proceedings of the 36th International Conference on Ocean, Offshore and Arctic Engineering, 4: OMAE2017-61201, V004T03A009. https://doi.org/10.1115/OMAE2017-61201. Published version. Full-text is not available in AURA as a separate file.Paper II: Mikulski, Z. & Lassen, T. (2019). Fatigue crack initiation and subsequent crack growth in fillet welded steel joints. International Journal of Fatigue, 120, 303-318. https://doi.org/10.1016/j.ijfatigue.2018.11.014. Published version. Full-text is not available in AURA as a separate file.
Paper III: Mikulski, Z. & Lassen, T. (2020). Crack growth in fillet welded steel joints subjected to membrane and bending loading modes. Engineering Fracture Mechanics, 235: 107190. https://doi.org/10.1016/j.engfracmech.2020.107190. Published version. Full-text is not available in AURA as a separate file.
Paper IV: Mikulski, Z. & Lassen, T. (2022). Probabilistic models for the fatigue resistance of welded steel joints subjected to constant amplitude loading. International Journal of Fatigue, 155: 106626. https://doi.org/10.1016/j.ijfatigue.2021.106626. Published version. Full-text is available in AURA as a separate file: https://hdl.handle.net/11250/3068998.