Blar i Department of Engineering Sciences på tittel
Viser treff 119-138 av 1052
-
Backlash Identification in Two-Mass Systems by Delayed Relay Feedback
(Journal article; Peer reviewed, 2019) -
Backlash in slew bearings : the advantages of an all-electric drive system
(Master thesis, 2012)Konfidensiell til / confidential until 01.07.2017 -
Battery systems for commercial buildings with solar power : Control and operation strategies
(Master thesis, 2019)In order to reach the climate targets, a sustainable energy system based on renewable energy generationis required. Battery storage systems are considered part of the solution, aselectricity generationfrom ... -
Bestandighetsegenskapene til hvit betong sammenlignet med grå betong i tilsvarende fasthetsklasse Forsøk av fryse/tine-nedbrytning med avisingssalter.
(Master thesis, 2023)The basis of this master thesis is the new planned «Knubben» harbor bath in Arendal. The architects from Snøhetta had decided to build the construction in white concrete. White concrete is curently a material that is not ... -
Bestandighetsstudie av Ultra-High Performance Concrete (UHPC) : En forskning om påvirkningen av rissvidde, overdekning og eksponeringsmiljø med hensyn på betongens beskyttelsesevne mot armeringskorrosjon
(Master thesis, 2020)Ultra-High Performance Concrete (UHPC) was developed in research to increase the strength and durability of concrete. The material has shown remarkable ductility, durabilityand strength properties in laboratory tests, ... -
BIBO stability analysis for delay switched systems with nonlinear perturbation
(Journal article; Peer reviewed, 2013)The problem of bounded-input bounded-output ( BIBO) stability is investigated for a class of delay switched systems with mixed time-varying discrete and constant neutral delays and nonlinear perturbation. Based on the ... -
Biochar-pellets as substitute for fossil coal in metallurgical processes
(Master thesis, 2018)This thesis serves as a base for later research on substituting fossil coal and coke with biochar in the Norwegian metallurgical industry. Because Norwegian electricity production is almost entirely based on carbon dioxide ... -
Blockchain-based trust management and authentication of devices in smart grid
(Peer reviewed; Journal article, 2022)The digitalization of the power grid and advancement in intelligent technologies have enabled the service provider to convert the existing electrical grid into a smart grid. The transformation of the grid will help in ... -
Bollard Segmentation and Position Estimation From Lidar Point Cloud for Autonomous Mooring
(Peer reviewed; Journal article, 2021)This article presents a computer-aided object detection and localization method from lidar 3-D point cloud data. This topic of interest is in the framework of autonomous mooring, where the ship is tied to the rigid structure ... -
Bolts detection and a combination of conventional and reinforcement learning based control of UR5 industrial robot
(Master thesis, 2021)The main objective of this paper is to investigate the possibilities for using reinforcement learning to control a UR-5 robot. The paper also looks at how well reinforcement learning works to control a UR-5 robot. These ... -
Bond graph modeling and simulation of wind turbine systems
(Journal article; Peer reviewed, 2013)This paper addresses the problem of bond graph methodology as a graphical approach for the modeling of wind turbine generating systems. The purpose of this paper is to show some of the benefits the bond graph approach has, ... -
Branch-Manoeuvring Capable Pipe Cleaning Robot for Aquaponic Systems
(Communications in Computer and Information Science;1616, Chapter; Peer reviewed, 2022)Aquaponic systems are engineered ecosystems combining aquaculture and plant production. Nutrient rich water is continuously circulating through the system from aquaculture tanks. A biofilter with nitrifying bacteria breaks ... -
Brannmotstanden til fiberkompositter etter slagskade : Numerisk analyse med beregning for å se endringen i kapasitet til fiberarmerte kompositter under høy temperatur etter at det har blitt utsatt for en slagskade
(Master thesis, 2017)Fiber reinforced composites have many good properties, but also many applications that make it vulnerable to accidental loads, like impact damage and fire. The problem with this is that minor and larger damage can be ... -
Bruk av FEM-modellering til kapasitetsundersøkelser av momentoverførende knutepunkter i stål
(Master thesis, 2021)Eurocode 3 provides a rough analytical method to estimate the capacity of a steel joint by derivingthe overall behavior from its components. Numerical methods such as the finite element method(FEM) enable accurate simulation ... -
Bruken av 3D-laserskanning i produksjon av bygg
(Master thesis, 2023)The construction industry has vast potential for improving productivity and efficiency, and in the era of Construction 4.0 the spotlight has been put on the integration of state-of-the-art digital technologies and automation ... -
Bruken av 3D-laserskanning i produksjonen av bygg
(Master thesis, 2023)The construction industry has vast potential for improving productivity and efficiency, and in the era of Construction 4.0 the spotlight has been put on the integration of state-of-the-art digital technologies and automation ... -
Building integrated PV system sizing based on techno-economics evaluation: Design study for a Southern Norwegian house
(Master thesis, 2021)Renewable energy sources are promising to take a significant share in the energy sector as a viable option for integrating with conventional fossil fuel power plants. This thesis contributes to the ongoing studies about ... -
Building Occupants' Comfort Levels Identified with POE and Visualized by BIM
(Master thesis, 2023)Creating and maintaining a comfortable indoor environment is crucial for energy-efficient building operation. However, there is often a disparity between defined comfort conditions and occupants' perceived comfort. To ... -
Calibration of the HMPID detector at the ALICE experiment
(Master thesis, 2022)The ALICE ("A Large Ion Collider Experiment")-experiment at the LHC ("Large Hadron Collider") at CERN is an experiment with the prime aim being investigating interaction forces of particles at extreme temperature and energy ...